OUR PRODUCTS
CT-3 (Pin Jointed Busbar System)
DSL Conductor bar - track are super finished and cross section is maintained to achieve required ampere. The material for track is G.I. (Galvanized & Copper) Conductors shall be accurately aligned to ensure positive electrical contact between the collector and the conductor. Separate conductors shall be provided for each phase. Insulation cover shall be rigid PVC. Range of Ampere available with the material of G.I. & Copper: G.I.: 60 Amp. to 125 Amp. Copper: 120 to 250 Amp.
| Brand | CT Make |
|---|---|
| Model | CT-3 |
| Type | PIN Jointed Type Busbar System |
| Conductor Material | Galvanized Or Copper |
| Insulation Type | PVC (IP35) |
| Ampere Capacity (G.I.) | 60 to 125 Amp. |
| Ampere Capacity (COPPER) | 120 to 250 Amp. |
| Maximum Voltage | 440V |
| Pole Type (1 Pole) | Individual |
| Pole Type (4 Pole) | RYBG (Red, Yellow, Blue, Green) |
| Jointer Type | Pin Jointed |
| Standard Length | 4.0 Mtr. (4000mm) |
| Mounting Bracket Distance Pitch | 1000mm |
| Busbar Distance Pitch | 42mm (Center) |
Accessories Includes
Hanger Clamp
4 Pole: Per Mtr. 1 No. | 1 Pole: Per Mtr. 4 Nos.
Anchor Clamp
Per 50 Mtr. 4 Nos.
Splice Cover
Used to cover each joint.
End Cap
Used to cover DSL ends on either side, with one required for one Bar/phase.
End Power Feed
For DSL systems powered from ends, 'End power feed' is required for the power supply of the Bus bar system, and it is required separately for each phase.