OUR PRODUCTS
CT-5 (Bolt Jointed Aluminum Bus bar System)
DSL Conductor bar - track are super finished and cross section is maintained to achieve required ampere. The material for track is Aluminum. Conductors shall be accurately aligned to ensure positive electrical contact between current collector and the conductor. Separate conductors shall be provided for each phase. Insulation cover shall be rigid PVC. Range of Ampere available with the material of Aluminium: Aluminium: 400 Amp. to 1500 Amp.
| Brand | CT Make |
|---|---|
| Model | CT-5 |
| Type | Bolt Jointed Type Heavy Duty Bus Bar |
| Conductor Material | ALUMINIUM |
| Insulation Type | PVC (IP35) |
| Ampere Capacity | ALUMINIUM: 400 to 1500 Amp. |
| Maximum Voltage | 440V |
| Pole Type | 1 Pole: Individual |
| Jointer Type | Bolt Jointed Type |
| Standard Length | 4.0 Mtr. (4000mm) or 4.5 Mtr. (4500mm) |
| Mounting Bracket Distance Pitch | 1500 mm |
Accessories Includes
Hanger Clamp
1 Pole: Per Mtr. 4 Nos.
Jointer
Bus bar Jointer is required to Joint 2 bus bars of Standard length of 4.5 Mtr. Or 4 Mtr. to make a long travel up to required distance.
Joint Cover
Joint cover is used to cover each joint.
End Cap
End Cap is used to cover DSL ends on either side. That is required one for one Bar/phase.
End Power Feed
For DSL system that is powered from ends, 'End power feed' is required for Power supply to whole Bus bar system. That is required separately for each phase.